Envalior

Manufacturing eco-friendly, lead-free water heater and boiler parts

Governments and consumers are more concerned than ever with sustainability and public health issues that stem from the global water industry – including its water heater market. Recent surges in energy prices have increased demand for more energy efficient heaters, boilers and heat pumps. This trend has driven up global sales of condensing boilers, as well as small tankless electric and gas-powered water heaters – which may be up to 34% more energy efficient than conventional storage tank alternatives.

Public health organizations are leveraging advanced toxicological insights and impurity analysis techniques to drive public awareness of adverse health risks related to poor drinking water quality. As a result, more consumers are concerned with toxic lead levels found in drinking water, due in large part to the Flint, Michigan water crisis. This public health issue is widespread according to a National Resources Defense Council study estimating that over 61 million Americans used drinking water systems in which lead levels above the recommended 5 parts per billion (ppb) limit were detected between 2018 and 2020.

To protect the health of consumers, key regulatory bodies, including the National Sanitation Foundation (NSF), have rapidly altered standards for manufacturing drinking water components. These changes include new, stringent material regulations for plumbing parts – including water heaters, heat pumps and boilers.

Thermoplastics, including polyamide 66 (PA66), polyphenylene sulfide (PPS), polyphenylene oxide (PPO), and polyphthalamide (PPA) are replacing brass and copper material solutions to minimize lead-related health risks, improve end-product sustainability and reduce manufacturing costs. PA66 and PPO are popular options, as they are cost-effective and offer high ductility that helps streamline production. Yet, in addition to providing limited design flexibility and demonstrating high leachable levels in warm water applications, these materials may lead to supply disruption and regulatory compliance issues.

For water heating equipment manufacturers, balancing design criteria and performance requirements for technical parts are an ongoing challenge. Continuous hot water exposure decreases the mechanical strength and dimensional stability of PA66, while built-in stress from molding PPO can lead to end-part assembly issues. The reliability of PA66 and PPO is often further compromised when molded into thin-walled components.

Manufacturers also need to address the risk of supply chain disruptions that slow down production. These delays often result from changes to water contact regulations, including NSF 61 and KTW-BWGL ­– which recently began requiring third-party supervised sample testing to certify materials. However, replacing PA66 and PPO often requires expensive re-tooling. And rushing material change programs to avoid product launch delays may compromise the performance of end-parts – resulting in costly unit repairs or water damage caused by leaks.

To overcome these challenges, manufacturers are looking for low-leaching, high-performance thermoplastics, while adopting contingency plans to ensure they have a steady supply of reliable solutions.

Envalior offers a range of proven water heater thermoplastic solutions available to manufacturers operating anywhere. Our EcoPaXX®, ForTii® and XytronTM solutions are free from potentially harmful leachable substances and comply with drinking water contact regulations observed worldwide, including NSF 61 and KTW-BWGL. Each material minimizes the risk of premature part wear in demanding hydrolytic conditions and simplifies material change programs by cost-effectively replacing lower strength thermoplastics in existing production processes.

Best-in-class hot and warm water contact properties

Our ForTii and Xytron materials provide excellent thermal stability, hydrolysis resistance and weldline strength and meet hot water certifications in all key regions. Compared to competing PPA and PPS materials, our solutions show superior retention of weldline strength after more than 1,000 hours of hydrolytic aging in 95°C to 110°C water. Xytron is the optimal replacement for brass when high precision molding is needed. ForTii is well-suited for producing parts with less stringent dimensional tolerance requirements, or when fixed temperature control within the PPS mold is not possible due to part design constraints.  

Specialized EcoPaXX grades certified for warm water applications are ideal for replacing PPO and PA66. The material often outperforms alternative low Tg PPA in reliability due to its superior dimensional stability, improved hydrolytic stability and slow crystallization speeds that enhance sealing and bonding properties.

Lowering production costs

Manufacturers around the globe have used ForTii, Xytron and EcoPaXX as drop-in solutions for PA66, PPA, PPO and PPS alternatives. All three solutions demonstrate high flow and easy processing behaviour, which enables suppliers to cost-effectively produce complex or thin-walled parts without compromising performance. Compared to competing PPS solutions, Xytron generates lower flash, which improves production yield, reduces the length of post-production processes and offers greater design flexibility.

At Envalior, we take pride in our role in bringing safer and more environmentally friendly products to market. By providing comprehensive design and material expertise, we enable manufacturers to deliver parts that offer unmatched performance and reliability. As a recognized leader in advanced material science, we work closely with suppliers and regulatory bodies to ensure our latest solutions respond to the ever-changing needs of each industry we support.

View related data sheet
 

Learn more about boiler and water heater components

Published on

19 November 2021

Tags

  • Blog (354)
  • Boilers & Heaters (3)
  • Xytron (37)
  • ForTii in electronics & electrical (15)

Share

Leveraging certified, globally accessible materials to produce high-quality water meters

Food contact safety standards in the kitchen

Popular blogs

  • Blog

    Leveraging certified, globally accessible materials to produce high-quality water meters

  • Blog

    Staying ahead of shifting water contact regulations while embracing circular materials

  • Blog

    Finding the right plastic for demanding oil and gas applications

  • Blog

    Envalior presents thermal management best practices during 2022 SPE EAV Conference

  • Blog

    Manufacturing long-lasting fuel cells for transport vehicles

  • Blog

    Keeping up with EV thermal management system components needs

  • Blog

    Material solutions to increase tank-to-wheel efficiency & reliability of fuel cells

  • Blog

    Helping you exceed the service life of fuel cell transport vehicles

  • Blog

    As use of FAKRA connectors increases, so does need to eliminate blistering

  • Blog

    Smartphone trends: The next generation of smartphone casing

  • Blog

    EU rules will make connectors more sustainable to reduce electronic waste, and make consumers’ lives easier

  • Blog

    Delivering high-performance USB-C connectors in custom colors

  • Blog

    Making electronic & mobile phone components thinner, stronger and integrated

  • Blog

    Improving ADAS performance while reducing costs

  • Blog

    Putting the safety into EMI shielding with Xytron™ PPS

  • Blog

    Manufacturing safe, high-performance MCBs with superior thermoplastics

  • Blog

    Choosing the right material solution

  • Blog

    How engineering plastics are powering electric vehicle growth

  • Blog

    Safe and sustainable commuting via next-gen e-bikes

  • Blog

    Celebrating our partnership with Piramidal in Brazil

  • Blog

    Making outdoor power equipment lighter and more efficient

  • Blog

    Driving agricultural equipment efficiencies to help meet global food demands

  • Automotive

    Helping you make a safer, lighter and more sustainable electric vehicle

  • Blog

    Leveraging advanced thermoplastics to manufacture cobots

  • Blog

    Envalior presents best practices to increase safety and reliability in EVs during 2023 SPE EAV Conference

  • Blog

    Key trends seen at Kitchen & Bath China 2023

  • Blog

    Optimizing antenna radiator units for 5G towers

  • Blog

    Optimizing thermal management systems for EVs with advanced materials

ABOUT THE AUTHOR

Pim Janssen

Market Development Manager at Envalior

After obtaining his Ph.D. in supramolecular and organic chemistry, Pim Janssen began his career at Envalior as a chemist for the engineering plastics Akulon (PA6) and the biobased EcoPaXX (PA410). He also spent a few years in product development and program management for high temperature polyamides ForTii (PPA), Stanyl (PA46), EcoPaXX (PA410) and Xytron (PPS). In 2018, he joined the business management team as market development manager for water and food contact, industrial applications, and to develop a unreinforced PPA portfolio.